Flag Performance Extra 2.5L Dark Blue
.jpg)
Description
Copper based antifouling. FLAG Performance Extra Antifouling is semi-hard to enable use in most craft up to 35 knots but still able to refresh its surface with some mild erosion. Proven performance for all types fouling in all waters. This product is self-priming when topping up existing (similar copper based) antifoulings; otherwise FLAG Antifouling Primer or FLAG Multi-Purpose Metallic Primer is required. Also suitable for long distance cruisers or racers via the semi-hard nature of the paint system.
Specifications
Extras/Additional Info:
Area of use:
Boat hulls
Substrates:
GRP, wood, steel and ferro cement. Not suitable for aluminium or galvanised surfaces.
Packing:
450ml (for use as boot-top) and 2.5 litre
Physical Constants:
Colour: Black, Dark Blue, Light Blue, Red and Steel White
Finish: Matt
Volume solids: 75%
Theoretical spreading rate: 10 sq.metres per litre
Flash point: 42ºC
Specific gravity: 1.80
Dry to touch: 2 hours
Over-coating time: 6 hours
Should be launched within 2 – 3 months dependent on ambient temperature.
*The theoretical spreading rate has been calculated for the stated volume solids and dry
film thickness. A practical spreading rate will depend on the actual dry film thickness, the
nature of the substrate, and the relevant consumption factor. The physical constants are
subject to normal manufacturing tolerances.
Application Details:
Application method: Brush, Conventional spray, Airless spray, Roller.
Thinner: FLAG Antifouling Thinners
Cleaning of tools: FLAG Antifouling Thinners
Surface condition: The surface should be stable, firm, dry and free of dust,
sand, loose old paint, dirt, grease, oil and salt.
Please refer to the Material Safety Data Sheet for further information.
For additional guidance please contact your local Technical Sales Representative.
If using multiple cans please check batch numbers are the same
