Hempel Silic One Tie Coat Yellow 2.5L

Use prior to applying Silic One Antifouling

What is SILICONE Fouling Release System? • It is a biocide free paint/method to prevent fouling • It is a "non-stick paint" • Biocide free • Copper free What is hydrogel? Hydrogel is based on unique, non-reactive polymers that are added to the paint, creating an invisible barrier between the hull surface and the water. Fouling organisms perceive the hull as a liquid and are consequently attaching to a much lesser extent. If the hydrogel is removed can it then build up again? The polymers responsible for the formation of the hydrogel are evenly distributed in the paint film. If the original hydrogel is removed a new hydrogel layer instantly builds up when the polymer responsible for hydrogel formation comes into contact with water. Unique, non-reactive polymers form a hydrogel layer between the substrate and water. Fouling organisms perceive the hull as a liquid and are consequently unable to attach to the hull. This amazing, biocide free product is based on silicone and hydrogel, which gives the coating surface water-like properties making it difficult for fouling organisms to attach to the hull and easy for them to be removed when the boat is in motion. Other amazing benefits are simple fouling cleaning and easy reapplication, resulting in long term cost reduction. SILICONE revolution will dazzle you with superiority. So, why wouldn't you give your boat a completely new treatment? ANTIFOULING SILICONE FOULING RELEASE HOW IT WORKS? Antifouling works by releasing biocides, in a controlled manner, to prevent fouling organisms from attaching to the boat. Upon exposure to water the top layer of antifouling is dissolved, and the biocides "leach" onto the coating surface, therefore keeping fouling organisms away. Unlike antifouling, the SILICONE Fouling Release System doesn't rely on biocides. This product is based on silicone and hydrogel, which gives the coating surface water-like properties, making it difficult for fouling organisms to attach firmly to the hull and easy for them to be removed when the boat is in motion. COST DIFFERENCE In the first year costs for antifouling are lower compared to the silicone fouling release system, but maintenance costs in the second year are higher. SILICONE Fouling Release System has higher costs in the first year, but maintenance costs in the second year will be lower. SILICONE reduces the friction, hence increasing speed and saving fuel. TYPES OF BOATS There are different antifouling paints for different types of boats, depending on the substrate. SILICONE Fouling Release System can be used on all types of boats. RECOATING COMPARISON Boats painted with an antifouling must be fully repainted every year, as the antifouling will be polished away by the end of the season. If the boat has been on land for a period of more than 1 month, one new coat of SILICONE needs to be applied prior to launch. If the boat stays in the water all year, a new coat every year may not be necessary, but more frequent cleaning may be required.