GEOCEL JOINERS MATE MITRE BOND
Description
Geocel® Joiners Mate Mitre Bond is a two part professional instant bonding system comprising of an adhesive and aerosol activator. It is simple to use and bonds in 10 seconds. Geocel® Joiners Mate Mitre Bond is ideal for use on all cornice and profile mitres, trims, picture frames, and architrave joints, worktop end strips, PVCu trims and much more.
Suitable for bonding:
- MDF
- Wood
- Rubber
- PVCu
- Metal
- Most Plastics
Application: The surfaces to be glued should be clean, free from dust, grease and TOTALLY DRY. Ensure surfaces are close fitting. Spray activator onto one surface only and allow to evaporate. Apply adhesive onto the other surface. Assemble and hold for 10 seconds, curing will be almost instantaneous so exercise care when aligning. Do not use externally on PVCu when moisture is present in the atmosphere or the PVCu is not totally dry. Contact with moisture during application can cause discolouration of the PVCu. This product is not suitable for permanent glass bonding or applications where the bonded joint may be immersed in water.
Available in a kit comprising of 50g adhesive and 200ml activator.
